BenQ SX920+ User Manual page 52

Main menu
High Altitude
Lamp Settings
Security Settings
Baud Rate
Closed Caption
System
Setup:
Advanced
Standby Settings
Network Settings
Reset All Settings
Source
Picture Mode
Lamp Mode
Resolution
Information
3D Format
Color System
Lamp Usage Time
Projector ID
Firmware Version
Note that the menu items are available when the projector detects at least one valid signal. If there is no
equipment connected to the projector or no signal detected, limited menu items are accessible.
52 Using the projector
Sub-menu
Lamp Mode
Reset Lamp Timer
Lamp Timer
Power On Lock
Change Password
Closed Caption
Enable
Caption Version
Network
Monitor Out
Audio Pass Through
MHL Charging
Wired LAN
AMX Device
Discovery
MAC Address
On/Off
Normal/Economic
Reset/Cancel
Lamp Usage Time
Normal Mode
Economic Mode
Equivalent Lamp Hour
On/Off
2400/4800/9600/14400/19200/38400/
57600/115200
On/Off
CC1 / CC2 / CC3 / CC4
Enable Network
On/Off
Standby Mode
Auto Disable
Network Standby Never/20 min/1 hr/3 hr/6 hr
Mode
On/Off
Off/Audio In/Audio L/R/HDMI-2/
HDMI-1/MHL
On/Off
Status/DHCP/IP Address/Subnet
Mask/Default Gateway/DNS Server/
Apply
On/Off
Reset / Cancel
Options