BenQ SX920+ User Manual page 56

Source menu
Function
Quick Search
HDMI Format
Audio Settings
Position
Phase
H. Size
56 Using the projector
Allows the projector to search automatically for input sources. If the source
scan is On, the projector will scan for input sources until it acquires a signal. If
the function is not activated, the projector selects the last used input source.
Selects an input source type for the HDMI signal. Auto is the default and
recommended setting. You can also manually select the source type. The
different source types carry different standards for the brightness level.
This function is only available when the HDMI signal is selected.
See "Adjusting the sound" on page 40
Displays the position adjustment page. To move the projected picture, use the
directional arrow keys. The values shown on the lower position of the page
change with every key press you made until they reach their maximum or
minimum. They will return to their factory preset values whenever the
projector is re-started.
This function is only available when the Component or PC signal
is selected.
Adjusts the clock phase to reduce picture distortion.
This function is only available when the
Component or PC signal is selected.
Adjusts the horizontal width of the picture.
This function is only available when the Component or PC signal
is selected.
Description
for details.