Table of Contents
Advertisement
Controlling the projector remotely through a web browser
Once you have the correct IP address for the projector and the projector is on or in standby mode, you
can use any computer that is on the same local area network to control the projector.
1. Enter the address of the projector in the address bar of your browser and click Go.
2. The remote network operation page opens. This page allows you to operate the projector as if you
were using the remote control or control panel on the projector.
• Menu
i
• Blank
•
(
)
•
( )
• OK
To switch input source, click on your desired signal.
ii
The source list varies according to the connectors available on the projector. ''Video''
stands for the Video signal.
44
Using the projector
ii
• Auto PC
• Input
See
•
(
)
•
( )
Activates the selected On-Screen Display
(OSD) menu item.
i
"Remote control" on page 12
for details.
Advertisement
Table of Contents
