Table of Contents
Advertisement
Using Corner Fit function
Manually adjust four corners of the image by setting the horizontal and vertical values.
1.
Press MENU/EXIT and then press
2.
Press
to highlight Corner Fit and press MODE/ENTER. The Corner
Fit correction page displays.
3.
Press
/
/
/
4.
Press
/
to adjust horizontal values.
5.
Press
/
to adjust vertical values.
6.
If optimal effect cannot be achieved, press MODE/ENTER to reset
Corner Fit value and repeat steps 4 and 5.
When resetting any one corner of the Corner Fit function, all
corners will return to default value.
7.
When done, press MENU/EXIT to go back to the previous page.
30
Using the projector
/
until the DISPLAY menu is highlighted.
to select one corner and press MODE/ENTER.
Corner Fit
Back
Enter
Corner Fit
Reset
Back
Advertisement
Table of Contents
