Table of Contents
Advertisement
Display menu
Function
Wall Color
Aspect Ratio
Overscan Adjustment
2D Keystone
Corner Fit
Digital Zoom
Digital Shrink
54
Using the projector
Corrects the projected picture color when the projection surface is not white.
See
"Setting a wall color" on page 39
There are several options to set the aspect ratio depending on your input
source. See
"Selecting the aspect ratio" on page 37
Conceals the poor picture quality in the four edges. You can also manually press
/
to decide how much to be concealed. Setting 0 means the picture is
100% displayed. The greater the value, the more portion of the picture is
concealed while the screen remains filled and geometrically accurate.
Corrects any keystoning of the picture. See
page 29
for details.
Adjusts one of the four corners separately to make sure the projected image is
straight. See
"Using Corner Fit function" on page 30
Upon adjusting Corner Fit, if you adjust the aspect ratio or overscan,
Corner Fit will be resetted.
Magnifies or reduces the projected image size. After the Digital Zoom page
displays, press ZOOM+/ZOOM- to reduce or magnify the image to a desired
size. Press the directional arrows (
control to navigate the picture.
The picture can only be navigated after it is magnified. You can further
magnify the picture while searching for details.
Shrinks the projected image.
1. After the adjustment bar displays, press
magnify the picture to a desired size.
2. Press AUTO to restore the picture to its original size.
Description
for details.
for details.
"Correcting picture distortion" on
for details.
,
,
,
) on the projector or remote
/
repeatedly to shrink or
Advertisement
Table of Contents
