Table of Contents
Advertisement
Turning the projector off
To turn the projector off, press POWER ( ) on the projector or
OFF
on the remote control and a warning message appears.
I
I
Press POWER/OFF ( ) again.
•
The Power indicator light flashes orange and the fans run for
about two minutes to cool the lamp. The projector will not
respond to any commands until the cooling process is complete.
After turning off the projector, do NOT unplug the projector until the
cooling process is complete and the fans stop running.
Interrupting the cooling process in any way may cause
overheating and result in damage to the projector.
•
Then, the Power indicator light is a steady orange once the
cooling process has finished and fans stop.
•
If the projector will not be used for an extended period, unplug
the power cable from the power outlet.
•
To protect the lamp, the projector will not respond to any
commands during the cooling process.
•
Actual lamp life may vary due to different environmental
conditions and usage.
•
If you attempt to re-start the projector shortly after shutdown,
the fans may run for a few minutes to cool down. Press
the fans stop and the Power indicator light turns orange.
48
Using the projector
I
I
I
I
Power/ON again to start the projector after
I
I
Advertisement
Table of Contents
