MB89201 Series – Getting Started
Chapter 2 Hardware Tools
2 Hardware Tools
This chapter describes the hardware tools and needed settings.
2.1 Compact-ICE
For the 8L Family emulation the Compact-ICE (in-circuit emulator) MSE1001C is used.
Connect this emulator to the PC's COM-port via RS232 cable. On Compact-ICE side a 25-
pin Sub-D male plug is needed for the connection. The connection interface is located on the
backside of the emulator.
Also supply 5 volts DC to the connection terminal on the backside of the Compact-ICE.
Warning:
Take care that the supply voltage is fixed to 5 volts DC. Otherwise it may damage
Compact-ICE or other connected tools!
MCU-AN-300000-E-V11
- 6 -
© Fujitsu Microelectronics Europe GmbH