Table of Contents
Advertisement
Figure 6.6 Remove the insulation basket and white insula-
tion from the center vent pipe.
Figure 6.7 Remove the insulation from the outer vent pipe.
2 SCREWS
Figure 6.8 To attach the first section of vent pipe, make
sure to use the fiberglass gasket to seal between the first
vent component and the outer fireplace wrap. Use 2 self
tapping screws to secure the gasket to the outer wrap.
Note: Once the seal cap has been removed, it cannot be
reattached.
38
Hearth & Home Technologies • DV3732-B, DV3732L-B, DV4236-B Installation Manual • 2496-980 Rev. M • 10/19
Rear Vent
NOTICE: Once appliance is set up for top or rear venting,
it CANNOT be changed at a later time.
Figure 6.9 Fold the tabs toward the center of the fire plug
(90º) and remove the insulation gasket.
Figure 6.10 Cut the metal retaining band and fold the
sides out.
Figure 6.11 Fold the center parts of the retaining band out
and use to remove the seal cap.
NOTICE: Once the seal cap has been removed it CANNOT
be reattached.
Advertisement
Table of Contents
