Approved Pipe - Hearth and Home Technologies DV3732-B Installation Manual

Table of Contents

C. Approved Pipe

Approved Pipe - Rigid

This appliance is approved for use with Hearth & Home

Technologies DVP or SLP venting systems. Refer to Sec-

tion 12.A for vent component information and dimensions.

DO NOT mix pipe, fittings or joining methods from differ-

ent manufacturers.

The pipe is tested to be run inside an enclosed wall.

There is no requirement for inspection openings at each

joint within the wall.

WARNING! Risk of Fire or Asphyxiation. This appli-

ance requires a separate vent. DO NOT vent to a pipe

serving a separate solid fuel burning appliance.

Approved Pipe - Flex

This appliance is approved for use with Hearth & Home

Technologies SLP-FLEX (6-5/8 in.) and SLP-FLEX7 (7

inch) venting systems.

DO NOT mix pipe, fittings or joining methods from differ-

ent manufacturers. SLP-FLEX and SLP-FLEX7

venting cannot be interchanged.

SLP-FLEX (6-5/8 Inch): venting may be used in any

venting configuration shown in the venting tables provid-

ed that the horizontal vent length is reduce by 25%.

SLP-FLEX7 (7 Inch-Canada Only): venting requires

adapter collars to tranisition from the 6-5/8 in. appliance

starting collar and to the 6-5/8" termination cap. Refer to

installation instructions included with the SLP-FLEX7 col-

lar adapter (SLP-FLEX7-A). SLP-FLEX7 Series venting

is approved for use in Canada only.