CYBEX 525T Owner's Manual page 32

6.
Press Display option
The scan can take up to 10 seconds and then display channel number. Some of these channels
may not be signals from the TV transmitters and need to be deleted.
Review channels
1.
Press Up or Down
2.
Delete unwanted channels by pressing Speed Up
to [dEL].
Press Enter to delete channel. Repeat process for additional unwanted channels.
3. Adjust the near/far setting if available channels are not showing.
Press Setup key to change the setting from F (Far) to n (Near). Press Display option
for available channels.
4.
Press Up or Down
If all TV transmitters are stored, and they all correlate the TV number to the correct TV heard, setup
is complete. If not you may need to re-scan or adjust the transmitter codes (see documentation for
your transmitters to perform a code change).
5. Press STOP to exit setup. Transmitter setup complete.
6. Proceed to Add FM Radio Stations (optional).
Setup TV FM Transmitters
If your TV's use FM transmitters, follow these instructions to assign a TV channel to each frequency.
1.
Press and the hold the Display option
Display will show time setup.
2.
Press DOWN
Press the ENTER
3.
Press the UP
4.
Press the ENTER
5. Plug in headphones to listen for channels during setup.
6.
Press Display option
manually.
Cybex 525T Treadmill Part Number LT-24018-4 H
key to scan for available channels.
to listen to available channels with the headphones.
to scroll through and verify all TV channels.
to navigate to the A/V setup screen.
key.
and DOWN keys to select FM.
key.
to seek the next TV FM frequency or UP
or Down
and UP keys for 3 seconds.
Page 32 of 79
to change the right LED window
or DOWN to tune
to re-scan