CYBEX 525T Owner's Manual page 43

4.
Press or
5.
Press or
6.
Press the SETUP
To exit, Press the SETUP
analog channels to be added or deleted, repeat steps 3 through 5.
7.
Press or
8.
Press to select Enable/Disable Digital Channel.
If there are not any channels programmed in the Service Level, No Channels Present will appear
in the menu.
9.
Press or
10.
Press or
11.
Press the SETUP
Features
1.
Press or
Cybex 525T Treadmill Part Number LT-24018-4 H
to highlight Add/Delete Analog Channel.
to select Added or Deleted.
button to return to the previous menu.
button until the programming menus disappear. If there are more
to highlight Enable/Disable Digital Channel.
to highlight the digital channel that needs to be enabled or disabled.
to select Enable or Disable.
button to return to the previous menu.
to select Features.
Page 43 of 79