CYBEX 525T Owner's Manual page 22

Install shield
Tighten the seven screws securing the shield to the base using a Philips screwdriver.
Install motor cover
1. Place motor cover on carpeting or other soft surface. Do not scratch top of hood cover.
2. Insert the four plastic connectors into the motor cover.
3. Place the motor cover into position vertically by aligning the two tabs and four plastic connectors.
Two plastic connectors are mounted in the front cover and two in the motor cover.
If motor cover top does not fit properly, loosen the side screws on the front cover as needed.
Cybex 525T Treadmill Part Number LT-24018-4 H
Page 22 of 79
Description
1 Base
2 Screws
3 Shield
Description
1 Plastic connectors
2 Motor cover
Description
1 Motor cover
2 Tabs
3 Plastic connectors
Qty.
1
7
1
Qty.
4
1
Qty.
1
2
1