Table of Contents
Advertisement
4. Thread six bolts into the remaining holes of the right upright and left upright.
5. Tighten all of the bolts using a 7/32" Allen wrench and 9/16" open end wrench.
Connect Display Cable
The display cable and CSAFE cable have the same connectors. The display cable is black, the CSAFE
cable is red.
1. Route the cables under all other cables and towards the base plate.
2. Plug the display cable, located at the bottom of the upright assembly into the communication port
of the controller.
Cybex 525T Treadmill Part Number LT-24018-4 H
Page 20 of 79
Description
1
Console
2
Upright (Right shown)
3
Bolt
Description
1
Controller
2
Communication port
3
Display cable, Black
4
CSAFE cable, Red (optional)
5
Coax cable (optional)
6
Power supply cable
Qty.
1
1
3
Qty.
1
1
1
1
1
1
Advertisement
Table of Contents
