CYBEX 525T Owner's Manual page 23

4. Using a Phillips screwdriver, finish tightening the four front cover screws. Be sure the screws are
securing the motor cover's tabs.
Install power cord
1. Plug the power cord into the base of the unit.
2. Secure the power cord with the mounting bracket and mounting screw using a Phillips screwdriver.
Level treadmill
Confirm that the treadmill is on a level surface.
Install coax cable (E3 View Monitor option)
Install 6' coax cable to the coax cable connector in base of unit. Do not install if facility provides coax
cable to base of unit.
Cybex 525T Treadmill Part Number LT-24018-4 H
Shock and electrocution hazard.
• Route power cord so it does not become damaged.
• Do not allow cord to be pinched or interfere with movement of treadmill.
Page 23 of 79
Description
1 Power cord
2 Bracket
3 Screw
Description
1 6' Coax Cable
2 Coax Cable Connector
Qty.
1
1
1
Qty.
1
1