CYBEX 525T Owner's Manual page 17

Remove shield
1. Loosen, but do not remove the two front cover screws securing the motor cover using a Phillips
screwdriver.
2. Remove motor cover by lifting vertically.
3. Loosen but do not remove the seven screws securing the shield to the base using a Phillips
screwdriver.
4. Remove shield by sliding sideways and then vertically off of base.
Install the uprights
1. Install the short and long standoffs to the right side of the base using a 3/4" open end wrench.
Cybex 525T Treadmill Part Number LT-24018-4 H
Page 17 of 79
Description
1 Motor cover
2 Front cover
3 Screws
Description
1 Base
2 Screws
3 Shield
Description
1 Standoff, short
2 Standoff, long
3 Base
4 Front of unit
Qty.
1
1
2
Qty.
1
7
1
Qty.
1
1
1
1