Fingerprint Reader Module - HP ZBook 15v G5 Maintenance And Service Manual

Fingerprint reader module

Table 5-13 Fingerprint reader module description and number
Description
Fingerprint reader module
Fingerprint reader module cable
Before removing the fingerprint reader module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the hard drive (see
7. Remove the audio board (see
To remove the fingerprint reader module:
1. Disconnect the cable from the fingerprint reader module ZIF connector (1).
2. Remove the module from the computer (2).
Reverse this procedure to install the fingerprint reader module.
60 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 40).
Hard drive on page 48).
Audio board on page
38).
59).
Spare part number
L25098-001
L25233-001