Touchpad Board - HP ZBook 15v G5 Maintenance And Service Manual

TouchPad board

Table 5-10 TouchPad board description and number
Description
TouchPad board
TouchPad bracket
TouchPad board cable (includes Mylar)
Before removing the TouchPad board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the hard drive (see
To remove the TouchPad board:
1. Disconnect the cable from the ZIF connector on the TouchPad board (1).
2. Remove the four Phillips M2.0×3.5 screws (2) that secure the bracket to the computer, and the lift the
bracket off the TouchPad (3).
3. Remove the four Phillips broad head M2.0×2.0 screws (4) that secure the TouchPad board to the
computer, and the lift the board from the computer (5).
Bottom cover on page
Battery on page 40).
Hard drive on page 48).
38).
Component replacement procedures
Spare part number
L29290-001
L20331-001
L20332-001
55