15.8
Changing the headlight bulb
Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
(XCF‑W)
–
Join plug-in connector
V01802-11
–
Position the headlight mask and secure it with rubber
2
straps
.
The holding lugs engage in the fender.
–
Position the brake line and wiring harness in the brake line
guide.
V01782-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Press and hold the switch-off button
idling until the engine stops.
–
Remove the headlight mask with the headlight. (
Main work
–
Turn protection cap
socket counterclockwise all the way and remove it.
–
Pull bulb socket
V01783-10
ELECTRICAL SYSTEM 15
1
.
p. 130)
while the engine is
1
together with the underlying bulb
2
of the position light out of the reflector.
p. 128)
129