12.9
Removing the lower triple clamp
12.10
Removing the lower triple clamp
Finishing work
–
Install the front wheel.
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
(EXC‑F EU, XCF‑W, EXC‑F BR)
Preparatory work
–
Press and hold the switch-off button
idling until the engine stops.
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove front fender. (
–
Remove the handlebar cushion.
Main work
–
Open the cable holder in front of the left radiator and detach
the wiring harness.
–
Loosen screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and set it
aside.
Info
V01785-10
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
Remove O-ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
V01757-10
(All Six Days models)
Preparatory work
–
Press and hold the switch-off button
idling until the engine stops.
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel.
–
Remove the fork legs.
–
Remove front fender. (
–
Remove the handlebar cushion.
SERVICE WORK ON THE CHASSIS 12
(
p. 114)
p. 130)
while the engine is
(
p. 113)
(
p. 65)
p. 74)
1
.
2
.
3
4
and protective ring
.
while the engine is
(
p. 113)
(
p. 65)
p. 74)
p. 128)
p. 128)
p. 63)
p. 128)
p. 63)
67