USER'S MANUAL OF WLAN BROADBAND ROUTER
Manual Downlink
Speed (Kbps)
Access Type
Local IP address
MAC address
Mode
Uplink Bandwidth
(Kbps)
Downlink Bandwidth
(Kbps)
Comment
Apply Changes
Reset
3.3.20
This page is used to setup dynamic routing protocol or edit static route entry.
Input number to set Downlink speed.
Click the set type either IP or Mac address.
Input the range IP address of LAN.
Input MAC address.
There are 2 options to control the bandwidth. One is
Guaranteed minimum bandwidth. The other is
Restricted maximum bandwidth.
Set Uplink bandwidth for range of IP addresses or
specific MAC address
Set Downlink bandwidth for range of IP addresses or
specific MAC address
Comments let you to remind your settings easily.
Click the Apply Changes button to add settings to the
list.
Click the Reset button to abort change and recover the
previous configuration setting.
Route Setup
Version: 1.0
49