USER'S MANUAL OF WLAN BROADBAND ROUTER
Item
Enable Dynamic Route Click to enable the Dynamic Router function.
NAT
Transmit
Receive
Enable Static Route
IP Address
Subnet Mask
Default Gateway
Metric
Interface
Description
Click to enable or disable the NAT function
Click to disable or RIP1, RIP2 the Transmit function.
Click to disable or RIP1, RIP2 the Transmit function.
Click to Enable the Static Router function
Manually Specify the packets arrive at the destination.
The internal network can be avoided through the Internet
of the packet exchange.
Fill in the Metric value. The default value is empty.
Click to select LAN or WAN interface.
Version: 1.0
50