Table of Contents
Advertisement
USER'S MANUAL OF WLAN BROADBAND ROUTER
Channel Width
Control Sideband
Channel Number
Broadcast SSID
WMM
Data Rate
Associated Clients
Enable Mac Clone
(Single Ethernet Client)
Enable Universal
Repeater Mode
SSID of Extended
Interface
Apply Changes
Reset
bytes long.
Select the operating channel width 20 MHz or 40 MHz.
[N band only]
Select the Sideband with Upper or Lower for channel
width 40MHz. [N band only]
Select the wireless communication channel from
pull-down menu.
Click to enable or disable the SSID broadcast function.
Refer to 4.14 What is SSID Broadcast?
Click Enabled/Disabled to init WMM feature.
Select the transmission data rate from pull-down menu.
Data rate can be auto-select, 1M to 54Mbps or MCS.
Refer to 4.32 What is Modulation Coding Schemes
(MCS)?
Click the Show Active Clients button to open Active
Wireless Client Table that shows the MAC address,
transmit-packet, receive-packet and transmission-rate for
each associated wireless client.
Take Laptop NIC MAC address as wireless client MAC
address. [Client Mode only]
Click to enable Universal Repeater Mode
Assign SSID when enables Universal Repeater Mode.
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
Version: 1.0
15
Advertisement
Table of Contents
