Table of Contents
Advertisement
USER'S MANUAL OF WLAN BROADBAND ROUTER
Show Client
Static DHCP
Set Static DHCP
Domain Name
802.1d Spanning Tree
Clone MAC Address
Apply Changes
Reset
I
Screen snapshot – Static DHCP Setup
Item
Enable Static DHCP
range of IP addresses; client with DHCP function set will
be assigned an IP address from the range.
Click to open the Active DHCP Client Table window that
shows the active clients with their assigned IP address,
MAC address and time expired information. [Server
mode only]
Select enable or disable the Static DHCP function from
pull-down menu. [Server mode only]
Manual setup Static DHCP IP address for specific MAC
address. [Server mode only]
Assign Domain Name and dispatch to DHCP clients. It is
optional field.
Select enable or disable the IEEE 802.1d Spanning Tree
function from pull-down menu.
Fill in the MAC address that is the MAC address to be
cloned. Refer to 4.24 What is Clone MAC Address?
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
Static DHCP Setup
Description
Click on to Enable the Static DHCP Setup function.
Version: 1.0
27
Advertisement
Table of Contents
