USER'S MANUAL OF WLAN BROADBAND ROUTER
List
Delete Selected
Delete All
Reset
3.3.7 WDS Settings
Wireless Distribution System uses wireless media to communicate with other
APs, like the Ethernet does. To do this, you must set these APs in the same
channel and set MAC address of other AP that you want to communicate with in
the table and then enable the WDS.
Screen snapshot – WDS Setup
Item
Enable WDS
this WLAN Broadband Router.
Click to delete the selected clients that will be access
right removed from this WLAN Broadband Router.
Click to delete all the registered clients from the access
allowed list.
Click the Reset button to abort change and recover the
previous configuration setting.
Description
Click the check box to enable wireless distribution
system. Refer to 4.21 What is Wireless Distribution
System (WDS)?
Version: 1.0
21