USER'S MANUAL OF WLAN BROADBAND ROUTER
3.3.23 Management - Time Zone Setting
This page is used to configure NTP client to get current time.
Screen snapshot – Management – Time Zone Settings
Item
Current Time
Time Zone Select
Enable NTP client
update
NTP Server
Apply Change
Reset
Refresh
Description
It shows the current time.
Click the time zone in your country.
Click the checkbox to enable NTP client update. Refer to
4.26 What is NTP Client?
Click select default or input NTP server IP address.
Click the Apply Changes button to save and enable NTP
client service.
Click the Reset button to abort change and recover the
previous configuration setting.
Click the refresh the current time shown on the screen.
Version: 1.0
53