Hardware Setup - IOGear Q1257-d Quick Start Manual

Hardware Setup

1. Connect your console controller to the Gamepad Port.
2. Connect your USB Keyboard to the Keyboard Port.
3. Connect your USB Mouse to the Mouse Port.
4. Using the included USB cable, connect the mini USB B plug to the
Game Port on the back of KeyMander, then connect the USB A plug to a
controller port on the console.
5. Power on the console and your KeyMander is ready to use.
6. Go to your game's Options or Settings menu and adjust the controller
sensitivity to maximum before starting game play.
Gamepad Keyboard
1
L R
SELECT START
Note: KeyMander is compatible with some, but not all PC gaming devices such as
keyboards, keypads and mice. When using a compatible PC configurable device,
be sure to setup/program your device on the PC before connecting it to KeyMander.
You may need to try different device settings and/or Keymander settings to achieve
best performance.
* When using a wireless keyboard & mouse set, plug the receiver into the Keyboard
Port. Some wireless keyboard & mouse sets may not be supported.
Mouse
2 3
*
Reset
Data Game
4
3
PC Power