USER'S MANUAL OF WLAN BROADBAND ROUTER
Time
Apply Changes
Reset
3.3.11 LAN Interface Setup
This page is used to configure the parameters for local area network that
connects to the LAN ports of your WLAN Broadband Router. Here you may
change the setting for IP address, subnet mask, DHCP, etc.
Screen snapshot – LAN Interface Setup
Item
IP Address
Subnet Mask
DHCP
DHCP Client Range
Click 24 hrs or set the starting time and ending time.
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
Description
Fill in the IP address of LAN interfaces of this WLAN
Access Point.
Fill in the subnet mask of LAN interfaces of this WLAN
Access Point.
Click to select Disabled, Client or Server in different
operation mode of wireless Access Point.
Fill in the start IP address and end IP address to allocate a
Version: 1.0
26