Installing And Uninstalling Mc-Miel; Mc-Miel Operation Flow - Omron SYSMAC CS1G Operation Manual

Overview and Operating Procedure of MC-Miel
Function
classification
Edit function Parameter edit
Program edit
Position data edit
Cam data edit
Factory default setting
Copy and paste
MC unit sup- Flash memory save
porting function
Memory initialization
Error log
Device information
Tool function Present position/alarm
monitor
Variables monitor/setting
2-2-3

Installing and Uninstalling MC-Miel

Installing Procedure
1,2,3...
1,2,3...
Uninstalling Procedure
1,2,3...
2-2-4

MC-Miel Operation Flow

Operating Procedure
1,2,3...
Function
Creates, edits, and transfers parameters.
Creates, edits, and transfers programs.
Creates, edits, and transfers position data.
Creates, edits, and transfers cam data.
Brings the dragged portion of MCH data back to its factory default setting.
Copies the dragged portion of MCH data to clipboard.
Pastes the data in clipboard to the dragged area of MCH data.
Saves various data in MC unit to F-ROM of MC Unit.
Saves parameters of servo driver in MC Unit to EEP-ROM of servo driver.
Initializes various data in MC Unit.
Displays or initializes error log in MC Unit.
Reads information (model, software version) of MC Unit.
Monitors present position and alarm information of each axis.
Monitors program No. being executed by each task.
Monitors and sets different types of variables in MC Unit.
1. Start Windows.
2. Insert MC-Miel (CD-ROM) into CD-ROM drive.
3. Installer will start automatically. Follow the instruction on the screen to in-
stall.
Installing MC-Miel completed
Note To see the operating manual
To see the operating manual of MC Unit provided in the CD-ROM, Acrobat
Reader is required.
1. Double-click "AcroReader51_ENU.exe" in Acrobat\Reader to install Adobe
Acrobat Reader 5.1.
2. After installation, open the operating manual.
1. Start "add/delete application" following the operation below:
Select Start button → Setting → Control Panel.
Then, start "Add/delete application".
2. Delete "MC-Miel for MCH" after having found it with search.
Uninstalling MC-Miel completed
When using motion control system (MC System hereinafter), settings for PLC,
MC Unit, and Peripherals are required.
The explanation below is provided on the assumption that all the devices
required for MC System are prepared. (For details, refer to the MC-Miel
Online Help.)
1. Connect a personal computer to PLC with MC Unit not mounted yet.
2. Turn ON the personal computer.
Description
Section 2-2
27