Removing Prints - Ricoh Priport JP5500 Operating Instructions Manual

Operation
I I I I
Press the { { { { Proof} } } } key and check
the image density and the image
position on the proof print.
1
Note
❒ If the image position is not cor-
rect, adjust it using the [Image
= ] key. See p.24 "Adjusting the =
= =
Position of Printed Images".
❒ If the image density is slightly
dark or light, adjust the image
density using the { { { { W W W W } } } } { { { { V V V V } } } } keys.
See p.25 "Adjusting the Image
Density of Prints".
J J J J
Enter the number of prints re-
quired with the number keys.
Note
❒ To change the number entered,
press the { { { { Clear/Stop} } } } key and
enter the new number.
20
K K K K
Press the { { { { Print} } } } key.
Note
❒ To stop the machine during a
m u l t i - p r i n t r u n , p r e s s t h e
{ { { { Clear/Stop} } } } key.
❒ To return the machine to the in-
itial condition after printing,
press the { { { { Clear Modes/Energy
Saver} } } } key.

Removing Prints

A A A A
Pull the front paper delivery side
plate down towards you to open.
Note
❒ You cannot open the rear paper
delivery side plate.