Ricoh Priport JP5500 Operating Instructions Manual page 118

❒ To change the value entered,
press the { { { { Clear/Stop} } } } key and
enter the new value.
J J J J
After you have finished designat-
ing modes for all the command
sheets, select [Outside Area] with
the [← ← ← ← ] [→ → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys.
K K K K
Select the mode for the outside
area with the [← ← ← ← ] [→ → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } }
keys.
L L L L
Press the [OK] key.
Note
❒ When you select Photo mode
for both inside and outside are-
as, you cannot select different
dot patterns and contrast.
❒ When you want to confirm your
settings, press the { { { { Make-Up} } } }
key twice. Then press the [OK]
key repeatedly until the panel
display reaches the setting you
want to confirm.
M M M M
If you have selected Photo mode,
select the dot pattern and the con-
trast with the [← ← ← ← ] [→ → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } }
keys.
Note
❒ Four dot patterns settings are
available:
• Setting 1: clearest
• Setting 2: clearer than setting 3
• Setting 3: clearer than setting 4
• Setting 4: clearer than the stand-
ard setting
N N N N
Press the [OK] key.
Make-up Printing
1
95