Removing Prints; Auto Off - Ricoh TC-II Operating Instructions Manual

Operation
Note
❒ To stop the machine during a
multi-print run, press the {Clear/
Stop} key.
1
❒ To return the machine to the ini-
tial condition after printing,
press the {Clear Modes} key.

Removing Prints

A
Pull the front paper delivery side
plate down towards you to open
it.
B
Remove the prints from the paper
delivery tray and close the paper
delivery side plate.
Auto Reset
The machine returns to its initial con-
dition automatically after your job is
finished.
16
This function is called "Auto Reset".
Note
❒ You can change the time the ma-
chine can waits before Auto Reset
mode starts.⇒ P.26 "User Tools".
❒ The machine will not automatical-
ly enter Auto Reset mode in the
following cases:
• If there is no ink
• If paper misfeed occur
• If the machine is printing
• If there is no paper
• If the cover open message is dis-
played

Auto Off

If you do not operate the machine for
a certain period the machine can enter
Quality Standby mode to remove ink
from inside the machine, and then
turn itself off. This function is called
"Auto Off".
Limitation
Quality Standby mode does not avail-
able when you use Color Drum Type
40S/50S.
Note
❒ You can change the time the ma-
chine can waits before Auto Off
mode starts.⇒ P.26 "User Tools".