Sort/Class Sort - Ricoh Priport JP5500 Operating Instructions Manual

Sort/Class Sort

Use this function to have the machine
scan your originals and automatically
sort prints.
Note
❒ The optional sorter is required.
❒ The paper sizes that can be used
with the Sort and Class Sort modes
are as follows.
Metric version
Inch version
❒ The maximum bin capacity is as
follows:
• 50 sheets (52 - 80g/m
21.2 lb)
• 40 sheets (81 - 105g/m
27.8 lb)
❒ If the prints have many images, the
bin capacity might be reduced.
❒ When the number of prints ex-
ceeds the bin capacity, the machine
does the following.
Number of Sets
1 - 20 sets
21 - 40 sets
A3L, B4L,
A4KL, B5L
11" × 17"L, 8 " ×
1
/
2
" ×
1
14"L, 8 /
2
11"KL
2
, 13.9 -
2
, 21.5 -
Operation
Prints continue to
be delivered to the
21st bin.
Printing stops.
Printing restarts
when you remove
all prints from the
bins and press the
{ { { { Print} } } } key.
❒ When you make less than 20 sets of
prints with the Sort/Class Sort
mode (first job), the prints are de-
livered to the lower tray bin. If you
make prints (less than 20 sets) of
a n o t h e r o r i g i n a l w i t h t h e
Sort/Class Sort mode (second job)
without removing the previously
made prints from the bin, the
prints of the second job will be de-
livered to the upper tray bin of the
sorter.
1. First Job
2. Second Job
❒ When you remove prints from the
bins, be careful not to rub the print-
ed side against the bin. Otherwise,
the printed side might be marked
with ink. This is likely to occur es-
pecially when printing documents
with many images or solid areas.
An easy solution is to place a blank
sheet of paper on top of the stack of
originals before you make the mas-
ter and prints.
Sort/Class Sort
2
135