Table of Contents
Advertisement
4
Reg. User Code
5
Chg. User Code
6
Del. User Code
7
Key Operator Code Use to turn Key Operator Code mode on or off.
8
Reg/Chg KeyOp-
Code
9
Restrict. Access
You can register user codes.
Note
❒ Up to 20 user codes (up to 4 digits) can be registered.
You can change user codes.
Note
❒ The number of copies made under the old code is added to
that made under the new user code.
Reference
For changing the user codes, see p.170 "6-5 Chg. User
Code".
You can delete user codes.
Note
❒ The number of copies made under the deleted code is also
deleted.
Reference
For deleting user codes, see p.171 "6-6 Del. User Code".
Note
❒ Default: Not to use
You can register or change key operator codes. (up to 4 digits)
In Key Counter mode, you have to set the key counter before
making prints. (To turn on Key Counter mode, contact your
service representative.) If Key Counter mode is on, Restricted
Access is turned on ("To use") automatically. If you turn Re-
stricted Access off ("Not to use"), you can make prints without
inserting the key counter.
Note
❒ Default: Not to use
User Tools Menu
4
155
Advertisement
Table of Contents
