Resetting To Factory Defaults - SATO Argox XM4 Series User Manual

XM4 Series Printer
User Manual

Resetting to Factory Defaults

3.6
Be cautioned that this will reset all printer settings back to defaults; if possible, print
the configuration label in advance before reset. All settings stored in FLASH memory
are retained even after turning off the printer.
To reset the printer to factory default settings:
1. Turn off the printer.
2. Press and hold the CANCEL button and turn on the printer.
3. When "RESET ..." is displayed on the LCD and the READY indicator blinks,
release the CANCEL button.
4. When "READY" is displayed on the LCD, the READY indicator stops blinking
but remains illuminated.
5. The following information is now back to defaults:
• Label parameters
• Heat (Darkness)
• Speed
• Others for specific emulation
Note:
Print length meter which indicates label length already printed cannot
be reset.
51