SATO Argox XM4 Series User Manual page 49

XM4 Series Printer
User Manual
After printing the self-test page, you can view the printer's configuration settings.
The self-test page provides valuable information about the printer's current setup,
allowing you to verify and ensure that the printer is functioning correctly and set up
to meet your specific needs. The printed settings typically include details as follows:
1. XM4-200-VXX.XX XXXXXXX PPLX
The firmware version and its build date.
2. Standard RAM
Total SDRAM size.
3. Available RAM
RAM is able to be used.
4. Flash Type
The flash memory type and size.
5. Available Flash
Flash is able to be used.
6. No of DL soft fonts (FLASH)
The number of fonts is downloaded in Flash.
7. No of DL soft fonts (RAM)
The number of fonts is downloaded in RAM.
8. No of DL soft fonts (HOST)
The number of fonts is downloaded in USB HOST.
9. H. Position Adjust
Move the print position horizontally.
10. Sensor Type
The media sensor type such as reflective sensor.
11. RTC Time
The date and time of the real-time clock (RTC). The default format is
month/day/year (hour:minute:second). If your printer has a built-in RTC, the
RTC time shows here.
12. Max Label Height
The max label length you can print at a time. For 200 dpi models, it is 100
inches; for 300 dpi models, it is 50 inches.
13. Print Width
The print width in dots.
44