SATO Argox XM4 Series User Manual page 42

XM4 Series Printer
User Manual
13 CONTROL CODE SET
Factory Default: STANDARD
Remark: Available in only PPLA printer language. Restart printer after changing the settings.
14 STANDALINE MODE
Factory Default: NO
Remark: Available in only PPLB printer language. Restart printer after changing the setting.
15 COUNTING
Factory Default: DOWN
16 RECOVER PRINT
Factory Default: ENABLE
Remark: There will be no reprint after recovery from a media out or ribbon out error.
17 WIN.CON.LEN.
Factory Default: 0 mm
Remark: Available only in Windows with bundled printer driver and for continuous media
STANDARD
ALTERNATIVE 1
ALTERNATIVE 2
ALTERNATIVE 3
NO
YES
DOWN
UP
DISABLE
Enter
ENABLE
0 ~ 254 mm
37
Enter/Right Up/Down
Enter/Right Left/Right
Enter/Right Up/Down
Enter/Right Up/Down
Enter/Right Left/Right
Enter/Right Up/Down
Enter
Enter/Right Up/Down
Enter/Right Left/Right
Back/Left
Back
Back/Left
Back/Left
Back
Back/Left
Back
Back/Left
Back