SATO Argox XM4 Series User Manual page 27

XM4 Series Printer
User Manual
Load Media in Guillotine Cutter Mode
Steps 1 to 3 are the similar to "Standard Mode".
1. Lift the top cover to expose the media compartment.
2. Load a roll of media into the media supply spindle and slide the media guide
inward.
3. Rotate the head latch counterclockwise and turn on the outside media guide.
4. Load the media roll into the printhead module and under the paper sensor guide.
For more specific lead media, see Step 4 in Standard Mode. Unhook the cutter
module and pull the down mechanism release lever from the cutter and feed
media through the cutter.
Print Head Module
Release Lever
hook
22
Paper Sensor Guide