Auto Repeater (Usa Version Only) - Icom ID-800H Instruction Manual

4
REPEATER OPERATION
■ Auto repeater
(U.S.A. version only)
The USA version automatically activates the repeater settings
(DUP– or DUP+ and tone encoder ON/OFF)
frequency falls within the general repeater output frequency
range and inactivate them when outside of the range.
D Setting the auto repeater function ON/OFF
q Push [PWR] to turn power OFF.
w While pushing [SET•LOCK], turn power ON to enter initial
set mode.
[SET•LOCK]
e Push [SET•LOCK] or [S.MW•MW] several times until the
"RPT" display appears as shown above right.
25
INITIAL SET MODE
USING
when the operating
[PWR]
r Rotate [DIAL] to select the auto repeater function from
"R1," "R2" or OFF.
Auto DUP: ON
Auto tone set: OFF
• "R1": auto repeater is ON, tone encoder is OFF.
• "R2": auto repeater is ON, tone encoder is ON.
t Push [PWR] to exit initial set mode.
D Frequency range and offset direction
Frequency range
145.200–145.495 MHz
146.610–146.995 MHz
147.000–147.395 MHz
442.000–444.995 MHz
447.000–449.995 MHz
Auto DUP: ON
Auto tone set: ON
Duplex direction
"DUP–" appears
"DUP" appears
"DUP" appears
"DUP–" appears