Icom ID-800H Instruction Manual page 47

Channel names can also be programmed via the mi-
crophone.
z Push [FUNC] then [
A(MW)] momentarily.
CLR
• "!" and memory channel number blink.
x Push [Y]/[Z] to select the memory/call channel to be as-
signed memory names.
c Push [BAND].
• Frequency readouts disappear and a cursor blinks.
v Push [Y]/[Z] to select the desired character.
• The selected character blinks.
b Push [
B(D-OFF)] or [
SET
sor to left or right, respectively.
[EXAMPLE]: Programming "CLUB" into memory channel 1.
Push , then push .
Push or to move the cursor.
C(T-OFF)] to move the cur-
ENT
Push to select the channel.
Repeat the
previous
steps.
n Repeat steps v and b until the desired channel names
are displayed.
m Push [FUNC] then [
name and exit the channel name programming condition.
Push
Push
Push , then push
"
"
Beep
"
Beep
"
Beep
"
MEMORY OPERATION
A(MW)] for 1 sec. to program the
CLR
to select the character
for 1 sec.
5
5
32