Lcd Information - Tripp Lite APSWX Series Owner's Manual

2. Features

2.2.4 LCD Information

LCD Display
Icons Description
Input Sources
AC input preset
PV panel input in use
Input LCD display information
Indicates Input voltage, Input frequency, battery voltage, PV voltage, PV2 voltage, Charger cur-
rent
Middle LCD display icons
Settings Mode
Warnings and Fault codes. Flashing with warning codes. Solid On with fault codes
Output LCD display information
Indicates the output voltage, output frequency, load percent, load, VA, load in watts, DC discharging
current
Battery information
Indicates battery level percentage during use or charging: 0-25%, 25-49%, 50-74%, 75-100%
Load Information
Indicates load level by percentage bar
0-25%
Indicates overload condition occurred
Operating Modes
Connected to AC Mains
Connected to PV panels
Solar charger is working
Indicates the DC/AC inverter circuit is working
Indicates unit alarm is disabled: press and hold the "ESC" key for 3 seconds to enable/disable
26-50%
7
51-75% 76-100%