Wiring Pv Modules To Inverter; Communication Connections - Tripp Lite APSWX Series Owner's Manual

3. Installation

3.5.1 Wiring PV Modules to Inverter

1. Remove insulation about 0.4 in. (10 mm) for both positive and negative conductors.
2. The use of ferruled ends on the positive and negative ends with proper crimping tool is recommended.
3. Reattach the bottom cover to the inverter with supplied screws.

3.6 Communication Connections

1. The RS-232 (DB9) port supports wireless remote monitoring modules.
15