Emerson AMS Trex Device Communicator User Manual page 80

Field Communicator application
September 2021
3.10.4
80
1.800.561.8187
Device connection wizard prompts
Do you intend to provide power from the Trex unit?
Leads are attached to:
Change Polling Option?
HART Device List
The Device List displays the devices that the Trex unit has detected. Each device is listed by
its tag and address. The Device List will not display when the Auto-Connect option for the
Field Communicator application is enabled and a device was found at address zero.
Tap a device displayed on the Device List to connect to it.
If a device is not listed, tap My Device Not Found to change the HART polling options.
Figure 3-23: HART Device List
www.
Answer
No
Positioner
Tap Yes and select 63.
information@itm.com
.com
User Guide
User Guide