Emerson AMS Trex Device Communicator User Manual page 34

AMS Trex Device Communicator overview
September 2021
2.10.5
2.10.6
2.10.7
2.10.8
34
1.800.561.8187
View information about the Trex hardware and
operating system
You can view the information about the Trex unit, including the name, serial number,
support contract, operating system, open-source licenses, and the MAC address.
Procedure
1. Tap Settings or the status bar at the top of the screen.
2. Tap More → About.
3. Tap OK.
Enter a name for the Trex unit
You can enter a name to uniquely identify the Trex unit. This is helpful if you have multiple
Trex units at your site. By default, the Trex unit is named "TrexXXXXXXXXXXXX" where the
Xs are the serial number. This name is displayed in Upgrade Studio or AMS Device
Manager.
Procedure
1. Tap Settings or the status bar at the top of the screen.
2. Tap More → About.
3. Tap Name.
4. Enter a new name up to 20 characters.
5. Tap OK.
View the application version number
You can view the version numbers for all the installed applications.
Procedure
1. Tap Settings or the status bar at the top of the screen.
2. Tap More → Installed Applications.
The version numbers for all installed applications are displayed.
3. Tap OK to close the screen.
Set the time and date
Note
When you connect the Trex unit to a PC or a wireless network, the Trex unit updates to use
the same time as the PC or wireless network.
Procedure
1. Tap Settings or the status bar at the top of the screen.
2. Tap More → Date & Time.
www.
information@itm.com
.com
User Guide
User Guide