Emerson AMS Trex Device Communicator User Manual page 32

AMS Trex Device Communicator overview
September 2021
32
1.800.561.8187
3. Tap the Wireless Networks option to enable or disable wireless.
Connect the Trex unit to a broadcasting wireless network
Note
The Trex unit cannot connect to a wireless network that requires you to enter log in
information on a website.
Procedure
1. Tap Settings or the status bar at the top of the screen.
2. Tap Wi-Fi.
3. Ensure the Wireless Networks option is set to ON.
The wireless communication is enabled.
4. Tap the network you want to connect to. You can tap to the right or left of the
network name.
5. Tap Connect, and enter credentials if prompted.
Once connected, a checkmark is displayed next to the name of the network to show
it is connected to the network. The wireless icon in the status bar changes to
Connect the Trex unit to a non-broadcasting wireless
network
You can connect to a wireless network that is non-broadcasting by manually entering
required options when in range.
Procedure
1. Tap Settings or the status bar at the top of the screen.
2. Tap Wi-Fi.
3. Ensure the Wireless Networks option is set to ON.
This enables the wireless radio in the Trex unit.
4. Tap Add Wi-Fi Network....
5. Edit the following options as needed. You may need assistance from your network
administrator.
Option
Network SSID
Security
6. Tap Connect.
Depending on the network security, you may need to enter credential information
when the network is in range.
www.
Description
The name of the wireless network.
The type of security used for the wireless network.
information@itm.com
.com
User Guide
.
User Guide