Commissioning
7.2 Local commissioning
7.2.4
Display views
Note
Display views
• Edit view and measurement view refer to the display only. While the device is in edit
view, the output remains active and continues to respond to changes in the device.
• The display will return to measurement view after ten minutes of inactivity (from last
button press), when in edit view and from within a wizard. Pressing
take you to the main navigation menu. (It will not return to the screen from which the
timeout occurred.)
Measurement view shows the current measured values of the device as well as status and
diagnostic messages.
①
②
③
④
⑤
Parameter view shows the parameters, parameter values and the wizards of the device.
①
②
③
④
30
Process value name
Process value unit
(① and ② alternate on display)
Process value measurement
If the process value is too large to be shown on the display (value has more than 5 digits),
hashes "#####" will be shown instead.
Process value number
Diagnostic symbol
Parameter name
Parameter value
Parameter number
"EDIT" symbol (permanently enabled)
SITRANS Probe LU240 with mA/HART
Compact Operating Instructions, 09/2021, A5E42673704-AE
button will then