6.2.1
Wiring instructions
Note
Initial connection
The display is not connected to the device when shipped. If this is not initial connection,
remove the display before wiring. See Remove existing display (Page 44).
1. Turn lid by hand in a counter-clockwise direction to remove it from device.
2. Strip cable jacket for approximately 70 mm (2.75") from end of cable, and thread wires
through gland.
SITRANS Probe LU240 with mA/HART
Compact Operating Instructions, 09/2021, A5E42673704-AE
6.2 Connecting SITRANS Probe LU240
Connecting
23