Table of Contents
Advertisement
Connecting External Float switch
1. Connect the external float switch to the 2PIN wire (BLK).
2. If the connector types of the external float switch and 2PIN wire do not match, cut off the end of the 2PIN wire before
connecting the wire to the external float switch.
3. Set SEG8 for the Install option (02 mode) to '1' or '2'. (Refer to "Setting an indoor unit installation option")
• The External Floating switch is not sold separately by Samsung.
NOTE
English
37
DB68-11271A-02_IM_CAC Universal AHU Indoor_AA_EN_.indd 37
2022-09-15 오전 9:53:24
Advertisement
Table of Contents
