Table of Contents
Advertisement
Installation Procedure
5. Set the SEG6 and SEG8 values:
a. Set the SEG6 value by pressing the
you want to set appears on the remote control display.
b. Set the SEG8 value by pressing the
you want to set appears on the remote control display.
When you press the
following order:
6. Press the
(Mode) button. Fan and On appear on the remote control display.
7.
Set the SEG9 and SEG10 values:
a. Set the SEG9 value by pressing the
you want to set appears on the remote control display.
b. Set the SEG10 value by pressing the
you want to set appears on the remote control display.
When you press the
following order:
8. Press the
(Mode) button. Heat and On appear on the remote control display.
42 English
DB68-11271A-02_IM_CAC Universal AHU Indoor_AA_EN_.indd 42
Steps
(Low Fan) button repeatedly until the value
(High Fan) button repeatedly until the value
(Low Fan) or
(High Fan) button, values appear in the
(Low Fan) button repeatedly until the value
(High Fan) button repeatedly until the value
(Low Fan) or
(High Fan) button, values appear in the
Remote control display
SEG6
SEG8
SEG9
SEG10
2022-09-15 오전 9:53:26
Advertisement
Table of Contents
