Table of Contents
Advertisement
Setting the installation options in a batch
Option No. for an indoor unit address: 02XXXX-1XXXXX-2XXXXX-3XXXXX
1
Make sure that the power is supplied to the indoor unit. If the
indoor unit is not plugged in, it must include a power supply.
2
Set the installation options of indoor units, by referring to the following table and by following the steps in "Common steps for
setting the addresses and options" on page 40.
• The installation options of indoor units are set to 020010-100000-200000-300000 by default.
• The SEG20 option, Individual control with remote control, allows you to control multiple indoor units individually by
using the remote control.
DB68-11271A-02_IM_CAC Universal AHU Indoor_AA_EN_.indd 51
F1
F2
V1
V2
F3
1(L) 2(N)
English
2022-09-15 오전 9:53:33
F4
51
Advertisement
Table of Contents
