Table of Contents
Advertisement
3. Remove thirteen (13) 1/4" hex head screws and remove
cover.
Removing the Evaporator Fan
1. Complete the steps
1-3
Evaporator Cover.
2. Remove the tape and piece of foam over the fan assembly.
from section Removing the
JennAir® and KitchenAid® 36", 42", and 48" Built-In Side by Side Refrigerators
COMPONENT ACCESS (CONT.)
3. Remove four (4) 1/4" hex head screws.
4. Disconnect the wire harness.
5. Lift the fan assembly from the bottom and pull out.
6. Remove three (3) 1/4" hex head screws to release evaporator
fan from the housing.
4-11
n
Advertisement
Table of Contents
